Sort by:
 |
This is the Bucket seat desktop holder by AUTOart. The contour of this racing bucket seat accepts most small items on desktop to serve as a desktop holder. Alternately, the seat can also used as a mobile phone holder. The seat is made of die cast in zinc alloy and the surface is coated with a special red paint that simulates the texture of fabric. The actual size L:8.8cm (3.4 ) W:7.5cm (3 ) ... [ read more ] |
$54.00
|
 |
This is the Brake caliper tape dispenser (pewter) by AUTOart. Limited edition of 199 piecesAUTOart is pleased to announce the launch of its newest desktop accessory for office car enthusiasts. If your job requires you to brake for tape, there is no better way than with this 6-pot pewter brake caliper tape dispenser designed and hand-crafted to look identical to those fitted on high-performance su... [ read more ] |
$186.00
|
 |
This is the BRAKE CALIPER NAME CARD HOLDER Red by AUTOart. In the old days, brakes were not a part of the vehicle to be shown off as something decorative, such as chromed engine parts or anodized wheels. The brakes, which convert the kinetic energy of the moving vehicle into heat energy through friction, were once just dirty and often rusty cast-iron parts hidden inside the wheel, quietly (or som... [ read more ] |
$24.00
|
 |
This is the BRAKE CALIPER NAME CARD HOLDER by AUTOart. In the old days, brakes were not a part of the vehicle to be shown off as something decorative, such as chromed engine parts or anodized wheels. The brakes, which convert the kinetic energy of the moving vehicle into heat energy through friction, were once just dirty and often rusty cast-iron parts hidden inside the wheel, quietly (or sometim... [ read more ] |
$24.00
|
 |
This is the GEARSHIFT CUFFLINKS by AUTOart. AUTOart has introduced a cufflink for the well-dressed and discriminating car enthusiast evoking a gated gearshift of a vintage Italian sports car. The gearshift cufflinks are made of finely cast metal that is then chrome-plated. The styling of the gear lever with a round metal knob echoes the manual gear levers of certain Ferrari and Lamborghini mode... [ read more ] |
$36.00
|
 |
This is the Fuel cap canister by AUTOart. Replicating a full size motorbike fuel cap, the all-aluminium Fuel Cap Canister may be used to store valuables, small parts in the garage, or office and home accessories.The actual size dia:9.8cm |
$60.00
|
 |
This is the Wheel rubber eraser (4 pieces per set) by AUTOart. Tires usually leave behind black skidmarks, but what if they did the opposite? AUTOart s new Wheel Rubber Eraser cleans up mistakes on paper while expressing your passion for the classic Porsche 911s of the past and their iconic Fuchs wheels. The Fuchs was the first forged aluminium wheel produced for the auto industry, jointly d... [ read more ] |
$30.00
|
 |
This is the Exhaust chopsticks set by AUTOart. Appearing like a miniature exhaust system, the two exhaust pipes function as a pair of chopsticks when taken out from the muffler. The muffler itself is placed on the table as a chopstick rest. The chopsticks are made of special plastic that is hygienically safe and the exhaust tips and muffler body are made of aluminium.L:240mm |
$24.00
|
 |
This is the Twin-pipe muffler stainless steel herbs grinder by AUTOart. To bring an automotive theme to the dining table, this spice grinder is made in the shape of a twin-pipe muffler. Measuring 135 cm (5.3 ) in height and 80 cm (3.15 ) in width, the muffler body is fabricated from welded stainless steel sheet. The two fully machine-cut stainless steel exhaust pipes placed in the muffler bod... [ read more ] |
$96.00
|
 |
This is the Carburetor sale&pepper shaker advanced version (aluminium die-cast / taller) by AUTOart. The aluminum side-draft carburetor body, reduced to 70% of its original size, is fitted with two removable stainless steel inlet rampipes that contain salt and pepper. The front panel swings open to reveal a compartment for sugar sachets and toothpicks.The actual size L:12.6cm W:11.0cm H:12.5cm |
$120.00
|
 |
This is the Carburetor salt & pepper shaker grinder (aluminium die-cast) by AUTOart. AUTOart launched a salt and pepper dispenser replicated from a Weber DCOE carburetor. What is Weber carburetor? It is a high-performance carburetor that can make your car go faster by dumping a vast amount of calibrated fuel and air into an engine.AUTOart launched a salt and pepper dispenser replicated from a We... [ read more ] |
$120.00
|
 |
This is the CENTRE LOCK RACING KITCHEN PAPER HOLDER by AUTOart. Ideal for the racing enthusiast's kitchen, the paper holder simulates the center lock system normally fitted to racing cars. The locking nuts are protected by safety pins, as in a real racing situation, to prevent them from accidentally coming loose. The holder is CNC-machined from aluminium billet with the base stamped from sheet al... [ read more ] |
$108.00
|
 |
This is the Centre lock racing toilet paper holder by AUTOart. Changing a toilet roll will never be boring for a racing enthusiast. It offers the challenge of determining how many seconds one really needs to undo the centre locking nut, protected by a safety pin, change the roll and then fit it all back together again without using an air gun. The holder is CNC-machined from aluminium billet with... [ read more ] |
$90.00
|
 |
This is the BRAKE DISC KEYCHAIN (6-POTS CALIPER) Black by AUTOart. AUTOart six-pot brake disc keychain features a rotor that actually rotates within the brake caliper, which is sturdy die-cast zinc metal cast to an authentic shape to resemble the massive six-pot calipers fitted to the world s elite automobiles. A replica of the external brake line is fitted at one end of the caliper, just as th... [ read more ] |
$36.95
|
 |
This is the BRAKE DISC KEYCHAIN (6-POTS CALIPER) Yellow by AUTOart. AUTOart six-pot brake disc keychain features a rotor that actually rotates within the brake caliper, which is sturdy die-cast zinc metal cast to an authentic shape to resemble the massive six-pot calipers fitted to the world s elite automobiles. A replica of the external brake line is fitted at one end of the caliper, just as t... [ read more ] |
$36.95
|
 |
This is the BRAKE DISC KEYCHAIN (6-POTS CALIPER) by AUTOart. AUTOart six-pot brake disc keychain features a rotor that actually rotates within the brake caliper, which is sturdy die-cast zinc metal cast to an authentic shape to resemble the massive six-pot calipers fitted to the world s elite automobiles. A replica of the external brake line is fitted at one end of the caliper, just as they are... [ read more ] |
$36.95
|
 |
This is the RACING BRAKE DISC KEYCHAIN (W/OMEGA SHAPE KEYRING) Silver by AUTOart. Designed after a performance oriented brake disc found on some higher end luxury and sport cars, this die-cast metal 3 cm (1.2 ) miniature brake disc keychain features a rotor that actually rotates within the brake caliper. The rotor surfaces are fitted with photo-etched stainless steel plates that have been manua... [ read more ] |
$14.95
|
 |
This is the RACING BRAKE DISC KEYCHAIN (W/OMEGA SHAPE KEYRING) by AUTOart. Designed after a performance oriented brake disc found on some higher end luxury and sport cars, this die-cast metal 3 cm (1.2 ) miniature brake disc keychain features a rotor that actually rotates within the brake caliper. The rotor surfaces are fitted with photo-etched stainless steel plates that have been manually bru... [ read more ] |
$14.95
|
 |
This is the AUTOart Slim Watch. AUTOart takes pleasure in announcing the launch of a sophisticated slim watch for men and women of all styles and ages on all occasions all over the world. With the smart design of interchangeable straps, the elegant timepiece is coveted for their casual yet tasteful appeal. The watch face features a simple and elegant design that can be moved across an interch... [ read more ] |
$144.95
|
 |
This is the Sport Caliper Watch - Stainless Steel Disc by AUTOart. AUTOart takes pleasure in announcing the launch of another finely crafted accessory for the automotive enthusiast. Our new Sport Caliper fully automatic wristwatch showcases one of the most important components on any motorcar: its firm and faithful brakes. The timepiece s exquisitely rendered metal bezel is a miniature six-pot ... [ read more ] |
$600.95
|
 |
This is the RACING BRAKE DISC. CLOCK by AUTOart. This racing brak is made to the size of a real racing brake, in 320mm, and fitted with a clock. The face of the cross-drill brake rotor is made from an aluminium sheet, hand polished to give it a hairline brakeing effect. The rotor with side ventilation holes are one-piece injection plastic, which the mould is very complicated with multi-side actio... [ read more ] |
$120.95
|
 |
This is the NISSAN SKYLINE GT-R (KPGC110) WHITE in 1:18 scale by AUTOart. This high-end composite model is hand painted and polished to a beautiful finish. The undercarriage, suspension, brakes, and exhaust are nicely replicated. Opening doors, hood, trunk and amazing engine detail. AUTOart's latest innovation in composite and diecast models, or exquisitely crafted replicas made from a hybrid ... [ read more ] |
$230.00
|
 |
This is the NISSAN SKYLINE GT-R (KPGC110) SILVER in 1:18 scale by AUTOart. This high-end composite model is hand painted and polished to a beautiful finish. The undercarriage, suspension, brakes, and exhaust are nicely replicated. Opening doors, hood, trunk and amazing engine detail. AUTOart's latest innovation in composite and diecast models, or exquisitely crafted replicas made from a hybrid... [ read more ] |
$230.00
|
 |
This is the BUGATTI EB110 SS (FRENCH RACING BLUE) in 1:18 scale by AUTOart. This high-end composite model is hand painted and polished to a beautiful finish. The undercarriage, suspension, brakes, and exhaust are nicely replicated. Opening doors, hood, trunk and amazing engine detail. AUTOart's latest innovation in composite and diecast models, or exquisitely crafted replicas made from a hybri... [ read more ] |
$230.00
|
[cancel]